Product ID:SCOTCH-WELD(R)EPOXY ADHESIVE 1751B ALUMINUM
MSDS Date:11/04/1985
FSC:8040
NIIN:00-181-7548
Kit Part:Y
MSDS Number: BJPXY

3M CO. ADHESIVES COATINGS AND SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

FILLERS

EPOXY RESIN

Fraction By Weight: 48.0%

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 8.0%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

RESORCINOL (SARA III)

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 1.0%

OSHA PEL 10 PPM/20 STEL

ACGIH TLV: 10 PPM/20 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Health Hazards Acute and Chronic:EYE CONTACT: PRODUCT MAY BE IRRITATING
TO EYES UPON DIRECT CONTACT. SKIN CONTACT: PRODUCT MAY BE
IRRITATING TO THE SKIN ON PROLONGED/REPEATED CONTACT. THE EPOXY
RESIN IN THIS PRODUCT IS A SKIN SENSITI ZER, FOR SUSCEPTIBLE
INDIVIDUALS. INHALE: MAY BE IRRITATING TO NOSE & THROAT. INGEST:
ORAL TOXICITY IS NEGLIGIBLE.
Medical Cond Aggravated by Exposure:BUTYL GLYCIDYL ETHER IS MUTAGENIC
BY IN VITRO TESTS.

First Aid:EYE CONTACT: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR
AT LEAST 10 MIN AND CALL A PHYSICIAN. SKIN CONTACT: WASH THOROUGHLY
WITH SOAP AND WATER. INHALE/INGEST: N/A.

Flash Point Method:CC
Extinguishing Media:CO2, FOAM, DRY CHEMICALS, WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:COLLECT SPILLED MATERIAL. CLEAN UP RESIDUE,
WIPE UP AREA AND PLACE IN METAL CONTAINER.

Respiratory Protection:AVOID INHALATION OR EYE CONTACT WITH DUST FROM
GRINDING OPERATIONS ON CURED MATERIAL.
Ventilation:IF USED IN A CONFINED AREA, PROVIDE LOCAL EXHAUST
VENTILATION. CURING OVENS MUST BE VENTED TO THE OUTDOORS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:PREVENT CONTACT WITH EYES AND SKIN. WASH
CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

Spec Gravity:1.30
Viscosity:PASTE
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY VISCOUS PASTE WITH LITTLE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE C, H, N DECOMPOSITION PRODUCTS.

Waste Disposal Methods:CURED TWO-PART MIXTURE MAY BE DISPOSED IN A
SANITARY LANDFILL. INCINERATE UNCURED WASTE IN A PERMITTED
HAZARDOUS WASTE FACILITY CAPABLE OF MEETING APPLICABLE REGULATORY
REQUIREMENTS FOR DESTRUCTION AN D REMOVAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.